Tag Archives: crafts for kids

Summer Camp: One Way to Make an Abstract Design

Summer Camp: One Way to Make an Abstract Design

 

Abstract Design

Abstract Design

MATERIALS:

Markers

Pencils

Crayons

Construction or bond paper

PROJECT:

  1. Find interesting objects in your home and trace them.
  2. Arrange them on construction or bond paper creating an abstract design.
  3. Trace the objects with markers or pencils or crayons. Trace one object at a time, adding objects as you go or lay them all down and trace them.
  4. Remove the objects from the paper. Choose three colors or two colors plus black. Now add patterns to the traced objects: dots, stripes, zigzags, checks or color some of the areas in the design.
  5. Mat the abstract design and display it or use it as a cover for a favorite book.

 

VARIATION:

Trace one object, turning the paper as you trace. Or overlap the object by placing it vertically, horizontally, upside down, etc.

 

Share Button

Summer Camp: Textured Prints

Summer Camp: Textured Prints
Textured Print

Textured Print

  Materials: Printer’s ink, black and two colors Glass surface Brayer Lightweight paper (rice or bond) Cleaner Rags

  1. Squeeze a line of black ink on the flat piece of glass. Roll the brayer over it and back and forth on the glass. Cover the brayer with ink.
  2. Find a very rough surface i.e., woven fabric, a collage of leaves, brick, stone, etc. Place the paper over this surface. Hold it firmly with one hand as you roll the inked brayer back and forth over it.
  3. Ink the brayer again and try another textured surface on a clean sheet of paper.
  4. Clean the glass and brayer thoroughly and wait to dry.
  5. Squeeze ink in the second color on to the glass and roll the brayer over it. Coat the entire brayer with the ink.
  6. Roll that color over a clean sheet of paper on another surface or roll the new color over the first sheet inked in black. Try different combinations of the two colors and black and different surfaces.
  7. Frame the finished textured prints or use them to make notecards.

ALTERNATIVE PROJECT:

Two textured collages,the one superimposed over the second, resulted in the textured print pictured above. The print was first printed in black ink rolled over a collage made of strings arranged in a pattern and glued to a board.  Geometric patterns made from poster board comprised a second collage. After the black ink dried, the print was placed on top of this second collage. Brown ink was rolled over the geometric shapes creating the design.

 

Share Button

Summer Camp: Windsock

Summer Camp: Windsock
Windsocks

Windsocks

 

Materials:

One sheet craft foam any color

One bandana any color or design or scrap of fabric (Ribbon is a good substitute)

Ink pen or fabric marker

Additional craft foam in various colors or craft papers in assorted colors

Patterns

Peel ‘n Stick Adhesive tape

Glue

Scissors

Hole punch

  1. Trace and cut patterns provided (below) on to the large craft foam.
  2. Adhere the adhesive tape to the back of the patterns, peel the back off and arrange them on to one side of the craft foam sheets (i.e., use green foam for the leaves, yellow foam for the daisies, etc) or use glue.
  3. Run a line of glue or the adhesive tape down the length of one short edge of the craft foam. Fold down the opposite edge of the craft foam and press to form an oblong windsock.
  4. Cut 1” slits along one edge of the bandanna or fabric and tear to form long strips.
  5. Punch three evenly spaced holes along the edge of the windsock. Insert a strip of fabric or bandanna into each hole. Make a knot to hold the strip in place. Gather the opposite ends of the fabric trips and tie them together into one knot.
  6. Punch evenly spaced holes along the bottom edge of the windsock for the remaining strips of fabric. Or cut small slits and poke the fabric through with the scissors. Place each fabric strip into each hole and knot each to secure in place.

Airports use windsocks to show wind direction and relative wind speed but they are also used for decorative purposes. Windsocks made of paper and silk originated in China and Japan. The ancient Romans used windsocks as military banners.

For more information go to www.ehow.com

 

 

 

Share Button

Intro to Summer Camp: Paper Garland Sign

Intro to Summer Camp: Paper Garland Sign

Materials:

Paper in various colors

Scissors

Pencil/eraser

Ruler or yard stick

Markers

Glue stick

Hole puncher

Pipe cleaners, string, paper twists or similar material

Number stencils or templates (optional)

One chain link fence

  1. Make a sign for your clubhouse or to celebrate the beginning of summer and the end of school. Make a loop for every letter of your sign and for the space between the words. Make a loop at the beginning of your sign which will be blank and a loop for the end of your sign which will also be blank. For example, a sign that says “School is out!” will have 11 loops for the words, one for the exclamation mark, two for the spaces between words and an extra loop at each end. That would be a total of sixteen loops.
  2. Use four or five different colored papers. Measure and cut the colored papers into six or more ½” x 8” strips.
  3. Glue one strip of paper measuring ½” x 8” overlapping the ends. Then glue a strip of paper measuring ½” x 8” through the first loop. Alternate the colors of the paper strips until you have the required number of paper loops forming a garland. Use the photograph for reference.
  4. Next, cut paper rectangles in various colors about 1 1/2” by 3.” Make enough to spell out your message.
  5. Trace a letter on each paper rectangle by using a template, stencil or free hand. Trace any exclamation, question mark or symbol, too.
  6. Punch a hole at the top of each paper rectangle. Punch a hole in the loops. Do not punch holes in the first and last loops and the loops that represent spaces between words.
  7. Cut string or pipe cleaners or similar material and loop it through the holes.
  8. Or use your imagination and glue seeds, glitter, sequins and other decorative objects!
  9. Tie a string through the first and last loops and tie them on to the fence. Don’t forget to add extra loops when you change the message!
Share Button

Our Imaginations! Part 1: A Tale of Two Umbrellas!

Our Imaginations! Part 1: A Tale of Two Umbrellas!

 

Umbreall

Blue, Green, and Chartreuse Umbrella

 

Read: The Umbrella by Ingrid and Dieter Schubert

A family dog finds a red umbrella on a windy day in the yard. When the dog opens up the umbrella, the wind carries them over the clouds and around the world. They go to Africa where the dog confronts elephants, alligators, hippos, zebras and storks; the oceans and their inhabitants; the tropics; the North Pole and finally, back home.

Project: Decorate an old umbrella and if you want to challenge yourself, give the design a theme: animals, fairies, sports, etc.

Materials:

An old umbrella

Glue

Beads

Markers

Sequins

Buttons

Silk flowers

Ribbons

Stencils

Paint in squeeze bottles

Stickers 

Additional Reading:

The Umbrella by Jan Brett

The Umbrella Day by Nancy Evans

Umbrella by Taro Yashima

*Copyright Art work by Marion Constantinides 2015

Share Button

Our Imaginations! Part 2: A Tale of Two Umbrellas!

Our Imaginations! Part 2: A Tale of Two Umbrellas!
Yellow Umbrella

Yellow Umbrella

Read: The Yellow Umbrella by Caitlin Dundon

A little boy and his mother are hurrying to school and work. It is a rainy day and they are almost late. The little boy spots a yellow “umbrellow” in the gutter. “Umbrella,” his mother corrects him and hurries him along.

A gust of wind blows his mother’s black umbrella inside out and it breaks.

When they reach his school, the little boy sees all kinds of umbrellas: red ones, blue ones,  orange ones, umbrellas with polka dots and “shapes of all kinds.” There are “even ones with Mickey Mouses.” When his mother picks him up at the end of the school day, she has a surprise for him.

Project: Paint an old umbrella yellow (or any color you wish) and/or decorate it with dots or stripes or Mickey Mouses!

Materials:

An old umbrella

Glue

Beads

Markers

Sequins

Buttons

Silk flowers

Ribbons

Stencils

Paint in squeeze bottles

Stickers

Additional Reading:

The Umbrella by Jan Brett

The Umbrella Day by Nancy Evans

Umbrella by Taro Yashima

*Copyright Art work by Marion Constantinides 2015

Share Button

Art That Flies: Spring is Here! Mobile

Art That Flies: Spring is Here! Mobile

HOW TO MAKE MOBILES

What is a mobile? A mobile is a construction made up of lightweight parts suspended by threads that attached to fine wires.

Now take the banner designs and use them to make mobiles. See how they change when you go from a flat design to a three-dimensional design. (See the tutorial below the following information.)

MATERIALS

Here are some basic supplies that you will need on hand for all the mobile designs:

Scissors

Wire, sticks, pencils, etc for arms

Compass

Thread, light and heavy weight

Poster board

Colored pencils and pens

Glue

Felt

Pencil and ruler

Recyclable materials

Tracing paper

Whole puncher (optional)

ADDITIONAL STUFF YOU SHOULD KNOW

Making a circle and a cone:

Technique #1: use a round object and trace.

Technique #2: Use a pencil compass to allow you to make a large or small circle. To find the diameter, measure circle from one edge through the center to the opposite side.

Technique #3: Cut out a circle. Cut out a section like a slice of a pie, from the edge to the center. Remove the section. Bring one edge over to the other side. Glue the overlapped edge. The larger the section you cut out, the taller and thinner to cone.

Technique #4: How to attach a thread: Thread objects by using a large needle. Push the needle through the shape at the balancing point and pull the thread until a small length is left. Then make a knot at the top of the shape. Cut off excess thread. When attaching the thread to the wire, tie it tightly.

BIBLIOGRAPHY

Holz, Loretta. Mobiles You Can Make. New York: Lothrop, Lee and Shepard Company, 1965.

Zubrowski, Bernie. Mobiles: Building and Experimenting with Balancing Toys. New York: Morrow Junior Books, 1993.

Spring Mobile

Spring Mobil

Ages: 5 – 12 years

Time: ½ hour – 1 hour

MATERIALS:

Construction paper or Fun Foam in 4 pastel colors

Eraser/ Pencil

One dowel rods cut to 12”

Tacky glue or glue stick

Patterns from the Banners project

Hole puncher

Ball of jute or string or wire

Scissors

1. Ask an adult to cut the dowel rods so that you have two. Cross them in the middle and tie them tightly with a piece of string or jute or wire. Lay aside.

2. Select the paper or Fun Foam or use the two materials together. Trace and cut shapes from the patterns used for the Spring Is Here! Banner. Vary the sizes of the flowers. Add a yellow circle for the center of the daisy.

3. Poke a hole near the top of the paper or Fun Foam shapes with a pencil or use a hole puncher. Then, lace a piece of string or jute or wire 6” to 8” in length through the hole at the top of each shape. Poke a hole at the bottom of the flowers and have some of them cascade. Tie the shapes to the dowel rods. To balance the mobile (sometimes called making the mobile level), place two or more shapes on each dowel rod and be sure that some of the shapes hang lower (or higher) than some of the others. Ask an adult for help if you need it.

4. Tie a piece of string in the middle of the two dowel rods for hanging. Does your sculpture move? What makes it move? How is this design different from the banner design? What are the differences? What are the similarities?

VARIATION: Instead of using dowel rods, dangle the strings from a clothes hanger. Vary the lengths and hang from an area where vibrations and the wind can make the dangling objects move.

ADDITIONAL INFORMATION FOR MAKING ADVANCED MOBILES

How to make wire arms: Make loops on the ends. This will make it easier to tie on shapes.  It is best to use needle-nose pliers and wire with a gauge of 14, 1, 18 or 20. Cut the wire to the desired length and bend until it is slightly curved. This will make the objects look more graceful as they balance from the wire. The curve also makes them look more graceful as they move in the air.

How to make a smooth curve: Grip one end of the wire with one hand and gently pull its length between the thumb and forefinger of the other hand, bending as you pull.

How to make a loop: Grasp the end or the wire with the needle-nose pliers. Hold the wire as you twist to form a circle. If you are tying on the objects, close the circle completely. If you are slipping on a loop into the circle, leave it slightly open. Close the loops when the mobile is complete. Hold the wire so that the eyelets or circles are on the under side of the arm when attaching the shapes to the mobile.

Share Button

Kid’s Crafts: Joy to the World Holiday Banner

Kid’s Crafts: Joy to the World Holiday Banner

CHRISTMAS

As Christianity became the dominant religion in Europe, Christian holidays were held alongside pagan holidays and celebrations.

Christmas has its roots in Yule, the pagan celebration of the winter solstice held in Northern Europe. The ancient Romans also held a winter festival by commemorating the temple of the god Saturn on December 17th. They called it Saturnalia and later extended the holiday festivities from December 17th to December 23rd.

Christmas, celebrated on December 25th, closes the Advent season and begins the twelve days of Christmastide celebrations.

Early Christians adopted pagan customs as well as pagan festivals and celebrations. For example, the Christmas tree is based on the pagan custom of bringing greenery into the house during the winter.

Christians began celebrating Christmas in the 4th century copying the pagans who celebrated the harvest by feasting during the winter solstice. It was a way of livening up the shortest day of the year.

As Christmas became commercialized, various symbols became identified with the holiday: Santa Claus, snow people, angels, pine wreaths, reindeer, stars, horns, the manger, and more.

Joy to the World Banner

Joy to the World Banner

JOY BANNER

Ages: 5 – 12 years     Time: one hour

MATERIALS:

Gold glitter pen                                   white felt square 14” x 20”

Beige pompom                                   Kelly green craft foam sheet.

Beige felt square                                dark green craft foam sheet.

Gold felt square                                  red craft foam sheet.

Red felt square                                   String – double the length of the dowel rod

Dowel rod                                           Pattern (optional)

 

Measure and trim the white square to 14” x 20”. Place the piece vertically. Make a loop by measuring and folding and ironing a 1” seam. Measure and fold a second 1” seam. Iron and glue the second fold. You will be inserting the dowel rod through this loop.

Trace and cut the shapes using templates or stencils or use the patterns provided below. To create the wreath, cut 21 – 22 holly leaves from the Kelly green craft foam sheet and 9 – 10 holly leaves from dark green craft foam sheet. Glue the leaves in a circular arrangement using the top ¾ of the white felt background. Overlap the leaves as you form the design of the wreath.

Trace and cut the bow and letters from the red craft foam sheet. Glue the letters and the bow to the bottom of the wreath.

Trace and cut the angel’s dress out of the red felt, the horn from the gold felt, the wings and face from the beige felt. Glue these pieces in the center of the wreath.

Glue a little moss to form the angel’s hair just below the halo. Glue pompom to show hands and feet. Using the glitter pen, define the angel’s wings and bow.

Cut the dowel rod to about 16”. Insert through the top loop. Cut string to a suitable length. Tie strings to each end of the dowel rod and hang.

Happy Holidays!

Making banners is fun for the family. You can use the banner ideas described here or you can use them as a springboard for your own ideas and designs.

All you need are some basic supplies and a love of making crafts!

Patterns for Winter Banner

Patterns for Winter Banner

Share Button

Our Imaginations! Camp for Kids: Papier Mache Dragon

Our Imaginations! Camp for Kids: Papier Mache Dragon

The craft PAPIER MACHE DRAGON is an adaption of the project “Two Masks” found in  the Reinhold Book of Arts and Crafts Techniques and published by Van Nostrand Reinhold Company, a division of Litton Education Publishing, Inc. in 1976.

Materials:

Newspaper, cut into strips

Scissors

Wall paper paste or white glue slightly thinned (Home improvement stores and wall paper stores sell wall paper paste.)

Containers for water and paste

½ egg carton

4 – 6 oz paper cup

Masking tape

Bond or construction paper

Green acrylic or poster paint or any color you choose for your dragon

Glitter, buttons, tissue paper, wiggle eyes, foil, etc

Paint brushes

Paper towels

  1. Cover your work space with newspaper. Cut a carton for a dozen eggs in half and tape it shut. Tape the paper cup to one end of the carton. (This will be the head of the dragon.) Make a long tube with the construction paper and tape it to the other end of the carton. (This will be the tail of the dragon.)
  2. Cut newspaper into strips.
  3. Read the directions on the label for using wallpaper paste. Mix wallpaper paste with water and stir. Pour into container.
  4. Dip strips into paste mixture. Allow excess paste to drip off into container. Apply to the dragon mock-up. Apply two or three layers. Allow to dry. To add more layers, apply them when the first three layers are dry. Dry thoroughly.
  5. Paint the dragon with acrylic or poster paint. Allow the paint to dry.
  6. Decorate the papier mache dragon with a variety of embellishments. Use your imagination!
Papier Mache Dragon

Papier Mache Dragon

 

Papier Mache Dragon

Papier Mache Dragon

Papier Mache Dragon

Papier Mache Dragon

 

Share Button

Our Imaginations! Camp for Kids: Painted Rocks

Our Imaginations! Camp for Kids: Painted Rocks

PAINTED ROCKS is an updated adaption of the project from “Painted Stones and Stone Sculptures” found in the Reinhold Book of Arts and Crafts Techniques and published by Van Nostrand Reinhold Company, a division of Litton Education Publishing, Inc. in 1976. Materials: Rocks preferably with a relatively smooth surface Poster or acrylic paints Brushes of various widths Container for water Palette or disposable smooth surface like wax paper Soap Paper Towels Newspaper or something similar to cover the surface of your work space

  1. Wash rocks thoroughly and dry. If rocks are very dirty, soak in a bucket of sudsy water, rinse and dry. In the meantime, cover your work space.
  2. Think of a design for the rock. Sometimes the rock suggests a design or an object. Stripes, dots, stars, swirls, circles are some ideas you can use alone or in combination.
  3. Select the paint colors and squeeze a small amount (about the size of a quarter to start) on the palette or wax paper. Squeeze white, black or brown for the base coat of the rocks.
  4. Prime the rock white if you selected lighter colors or brown if you selected darker colors. This step isn’t required but it makes the colors adhere to the rock better if there is a base coat on which to paint your design. Paint one side at a time and allow the rock to dry. Turn over and paint the other side.
  5. If you can’t think of a design, lay the paints on the surface randomly. Overlap the colors and see them run into each other.
  6. Paint one side at a time and allow the design to dry. Turn over and paint the other side.
  7. Use your rocks to decorate your desk or your bedroom’s window sill.

VARIATION: Select yarn or string in different colors and dip into glue. Wrap around the rock in different directions. Allow the glue to dry. VARIATION: Create rock creatures by gluing paper, pipe cleaners, pompom, buttons and more!

Painted Rocks Step I

Painted Rocks Step I

Painted Rocks

Painted Rocks

Painted Rocks

Painted Rocks

Painted Rock Variation

Painted Rock Variation

Share Button