Tag Archives: rice paper

Two-Dimensional Ideas on Paper: Prints from Nature

Two-Dimensional Ideas on Paper: Prints from Nature

The craft NATURE PRINTS was adapted from the project “From the Yard/Nature Prints” found in All-Around-the-House Art and Craft Book by Patricia Z. Wirtenberg and published by Houghton Mifflin Company in1968

Materials:

Leaves, bark, twigs

Printer’s inks or poster or acrylic paints in various colors (cheaper to use)

Drawing pencils (optional)

Rice or bond paper in white or various light colors (works best with poster/acrylic paints)

Brown wrapping paper or construction paper for use with printer’s inks

Brayer (or roller)

Piece of glass

Newspaper

Solvent for cleaning brayer and glass if using printer’s inks unless using water-soluble printer’s inks

  1. Collect fresh leaves from the trees or bushes in your neighborhood or yard. You will need some to experiment with and some for the last print. Other objects such as tree bark (if it’s easy to peel off) and even some twigs will work along with the leaves, too.
  2. Cover your work surface with newspaper. Lay down the glass and brayer on the work surface. Select the paints or inks that you will use. Acrylic or poster paints are less expensive than oil-based printer’s inks and easier to clean up after use.
  3. You can squeeze one color for each leaf or squeeze two or three colors side-by-side on the glass. The leaves in the samples shown used one or two or three colors at one time.
  4. Roll the paint or inks on the glass until the pigment covers the brayer. If you are using more than one color, let the colors run into each other. Roll the brayer over the leaf several times and turning the leaf over, lay it on a piece of paper like rice paper or bond paper. Use your hand to press the leaf so that it prints on the paper. Paper that is not too thick or too thin is the best to use if using acrylic or poster paints. Printer’s inks can use a slightly heavier paper like construction or brown wrapping paper.
  5. Remove the leaf and see how it printed on the paper. Experiment until you have a print that you like. Experiment with other materials from nature combined with the leaves.
  6. To create a mixed media design, color the whites of the leaves or the background paper or outline the printed leaves with colored pencils. See the two samples below.
  7. Frame the print or using old note card stationery, make note cards or poster cards of the printed leaves. They make a thoughtful gift for people who still write notes!
Share Button

Two-Dimensional Ideas on Paper: Textured Rubbings

Two-Dimensional Ideas on Paper: Textured Rubbings

Materials:

Thin paper like rice paper or bond paper

Any kind of crayons including Wax crayons

Graphite

Textured surfaces: chain link fences, tombstones, bricks, sidewalks, gratings, certain fabrics

 

  1. Find an interesting raised surface to rub. For the first rubbing, select a surface and rub with either the graphite or one of the wax crayons.
  2. For the second rubbing, rub with a different wax crayon on another surface or on the same surface. The shift the paper up or down or sideways, rubbing the surface with another color or the graphite.
  3. For the third rubbing, select two or three colors and two or three surfaces to rub. Use only one sheet of paper for this. Select a color and rub the first surface with it. Rub the second surface with a second crayon. Rub the third surface with a third color or the graphite.
  4. Do you notice a pattern created with the different colors and surfaces? Insert your best rubbing in a poster frame and hang on the wall of your bedroom.
  5. Alternative Project: Rubbings also make great greeting or note cards. Cut a blank piece of paper in half. Cut the rubbing and paste it to the front of the folded paper.  Cut the rubbing smaller still and you can make gift tags the same way as the greeting card.

 

For more ideas on rubbings:

All-Around-the-House Art and Craft Book by Patricia Z. Wirtenberg

Arts and Crafts Activities Desk Book by Joyce Novis Laskin.

Share Button

Summer Camp: Sponge Painting

Summer Camp: Sponge Painting
Sponge Painting: The Sun

Sponge Painting: The Sun

 

Materials:

Household sponges in various shapes and sizes (Household sponges found in grocery stores can create interesting patterns and designs.)

Craft paints in various colors

Water jar

Paint palette or paper palette

Printing paper like bond or rice paper or sheets of canvas

Markers or colored pencils.
Project:

  1. Draw a design or picture on a piece of paper and use it as reference for the sponge painting. Or draw directly on the surface that you are going to paint, i.e., a sheet of canvas.
  2. Cut small pieces of the sponge from the larger sponge. To create an abstract design, snip tinier pieces from the divided pieces of the larger sponge.
  3. Squeeze the paints on the palette.
  4. Dampen the sponges and squeeze out the excess water.
  5. Dab the sponge in the paint and dab it on a piece of scrap paper to test the design and the amount of paint needed. A lot of paint on a sponge will create large blobs of color on the paper or canvas.
  6. With the design as reference, dab the paint on to the paper. Do not drag the sponge because that will smear the paint (unless smearing is the effect you want to create).
  7. Remember to wash and rinse the sponge to use again or use a separate sponge for each color.
  8. Continue until you have completed the painting. Add details with a marker or colored pencil when the paint is dry.

NOTE:  In the example above,  the central design was painted first, then the background.

ADDITIONAL PROJECT:

Create a sponge painting on wood or stone.

 

Inspired by Arts and Crafts Activities Desk Book by Joyce Novis Laskin

Share Button

Our Imaginations! Camp for Kids: Nature Prints

Our Imaginations! Camp for Kids: Nature Prints

The craft NATURE PRINTS was adapted from the project “From the Yard/Nature Prints” found in All-Around-the-House Art and Craft Book by Patricia Z. Wirtenberg and published by Houghton Mifflin Company in1968

Materials:

Leaves, bark, twigs

Printer’s inks or poster or acrylic paints in various colors (cheaper to use)

Drawing pencils (optional)

Rice or bond paper in white or various light colors (works best with poster/acrylic paints)

Brown wrapping paper or construction paper for use with printer’s inks

Brayer (or roller)

Piece of glass

Newspaper

Solvent for cleaning brayer and glass if using printer’s inks unless using water-soluble printer’s inks

  1. Collect fresh leaves from the trees or bushes in your neighborhood or yard. You will need some to experiment with and some for the last print. Other objects such as tree bark (if it’s easy to peel off) and even some twigs will work along with the leaves, too.
  2. Cover your work surface with newspaper. Lay down the glass and brayer on the work surface. Select the paints or inks that you will use. Acrylic or poster paints are less expensive than oil-based printer’s inks and easier to clean up after use.
  3. You can squeeze one color for each leaf or squeeze two or three colors side-by-side on the glass. The leaves in the samples shown used one or two or three colors at one time.
  4. Roll the paint or inks on the glass until the pigment covers the brayer. If you are using more than one color, let the colors run into each other. Roll the brayer over the leaf several times and turning the leaf over, lay it on a piece of paper like rice paper or bond paper. Use your hand to press the leaf so that it prints on the paper. Paper that is not too thick or too thin is the best to use if using acrylic or poster paints. Printer’s inks can use a slightly heavier paper like construction or brown wrapping paper.
  5. Remove the leaf and see how it printed on the paper. Experiment until you have a print that you like. Experiment with other materials from nature combined with the leaves.
  6. To create a mixed media design, color the whites of the leaves or the background paper or outline the printed leaves with colored pencils. See the two samples below.
  7. Frame the print or using old note card stationery, make note cards or poster cards of the printed leaves. They make a thoughtful gift for people who still write notes!
Nature Prints

Nature Prints

 

Nature Prints

Nature Prints

 

Nature Prints

Nature Prints

 

VARIATION:

Make a sun print! Make sure you do this on a sunny day! Choose the objects you will use as the main design of the print. Objects like leaves, twigs, bark, seashells, and pebbles work well. Lay the objects that you choose on photographic, construction or drawing paper on a surface in a sunny location. The longer you leave it there, the deeper an impression your objects will make on the paper. Leave the objects and paper in the sun for four hours minimum. Remove the objects. You now have a sun print! Use the sun print for the nature collage tutorial or frame it and hang the print on your bedroom wall.

 

Sun Print

Sun Print

 

Share Button