Jun17

CELEBRATE THE SEASONS! Summer Is Fun! Mobile

Posted on by
CELEBRATE THE SEASONS! Summer Is Fun! Mobile
SUMMER MOBILE

SUMMER MOBILE

Ages: 5 – 12 years

Time: ½ hour – 1 hour

MATERIALS:

White felt square 36”x 36”

Orange craft foam

Yellow craft foam

White craft foam

Beige craft foam

Turquoise craft foam

Black craft foam

Moss

Black marker

White glue

scissors

String or jute or wire or thread

Dowel rods (plus cutters for cutting or sawing the dowel rods)

  1. Using the patterns provided, trace and cut the sun from the yellow craft foam, the pail from the orange craft foam, the shell from the beige craft foam, the shovel from the turquoise craft foam, and all four colors of craft foam for the ball. Finally, cut the sunglasses from the black craft foam. You don’t have to use all the patterns from the banners project.
  2. Take a small amount of moss and glue it on the top of the pail. Press down firmly while it dries.
  3. Use a black marker to draw the sun’s cheeks, smile and nose. If you are using the shell pattern, sketch a few lines on it to make it look three dimensional. Also, spell out “Summer Is Fun!”
  4. Cut two dowel rods. Tie a piece of string, jute or wire around the middle of the two dowel rods to secure them. Then, lace a piece of string, thread, jute, or wire 6” to 8” in length through the hole at the top of each shape. Tie the shapes to the dowel rods.
  5. To balance the mobile, place two or more shapes to each dowel rod and be sure that some of the shapes hang lower (or higher) than some of the others. Cut a string long enough to tie on either end of the dowel rods for hanging.
  6. Does your sculpture move? What makes it move? How is this design different from the banner design? Can you list the differences? Can you list the similarities? What is the difference between attaching the leaves on the mobile and attaching the leaves on the banner? What makes the leaves on the mobile three-dimensional and the leaves on the banner two-dimensional?
Share Button
Jun9

CELEBRATE THE SEASONS: SUMMER IS FUN! BANNER

Posted on by
CELEBRATE THE SEASONS: SUMMER IS FUN! BANNER

WHAT IS A BANNER?

A banner is a piece of cloth suspended between two poles and often bearing a design, symbol or slogan. Banners can celebrate the seasons, holidays or bear slogans. The designs in this series of Art Tutorials celebrate summer, spring, winter and fall.

SUMMER IS FUN!

SEASONAL PROJECT: SUMMER IS HERE! BANNER

       SEASONAL PROJECT    

Ages: 5 – 12 years

Time: ½ hour – 1 hour

MATERIALS:

White felt square 36”x 36

Orange Fun Foam*

Yellow Fun Foam

White Fun Foam

Beige Fun Foam

Turquoise Fun Foam

Black Fun Foam

Moss

Black marker

 

1. Measure and cut the white felt to 14” x 20”. Holding the felt vertically, fold a 1” seam at the top and iron. Fold a second 1” seam and iron again. Glue. The dowel rod will go through this loop.

2. Enlarge the photo of the completed banner (above). Then trace and cut the sun from the yellow Fun Foam, the pail from the orange Fun Foam, the shell from the beige fun Foam, the shovel from the turquoise Fun Foam, and all four colors of Fun Foam for the ball. Finally, cut the sunglasses from the black Fun Foam. Glue the pieces down.

3. Take a small amount of moss and glue it on the top of the pail. Press down firmly while it dries.

4. Use a black marker to draw the sun’s cheeks, smile and nose. Sketch a few lines on the shell to make it look three-dimensional. Also, spell out “Summer Is Fun”!

5. Cut the dowel rod to about 16” x 18”. Insert through the loop at the top of the felt. Cut string to a length that is suitable for hanging. Tie the string to the ends of the dowel rod and hang.

Have a fun summer!

Fun Foam is also called craft foam.

Share Button
Jun2

RECYCLED CRAFT PROJECT: VEGGIE PRINTS GIFT WRAP PAPER

Posted on by
RECYCLED CRAFT PROJECT: VEGGIE PRINTS GIFT WRAP PAPER

                    

MATERIALS:

Reused paper from mailed packages or paper bags or tissue paper

Any items with interesting shapes that you can paint, i.e. sponges

Idaho potatoes

A bunch of celery

Carrots (carrots may be too hard to carve designs but can be used to stamp circles)

Acrylic paints

Paint brushes

Butter knife

Cookie cutters

 

VARIATIONS (use alone or with the celery, carrots and potatoes):

Rubber stamps

Ink for rubber stamps

NOTE*

The veggie prints (above) were done with a sweet potato and poster paints applied with a brush directly on the potato surface.

 

 PROJECT:

  1. Cut off bottom of celery. Paint the bottom of the stalk with acrylic paint and stamp it on the paper. To use more than one color, wash off the celery and start over.
  2. Slice the carrot into discs. Carrots are suitable for stamping circular designs.
  3. Peel and cut a potato in large discs. Use cookie cutters to make shapes on the potato or make your own shapes.
  4. Paint these “stamps” (using and odd number of colors like 3 or 5) and stamp them on the paper in a pleasing pattern.
  5. Use rubber stamps together with the veggies or alone to form patterns.
  6. Allow the ink and/or acrylic paint to dry before wrapping gifts.

 

Share Button
May26

RECYCLED CRAFT PROJECT: PAPER BAG BOOKS

Posted on by
RECYCLED CRAFT PROJECT: PAPER BAG BOOKS
Paper Bag Books

Paper Bag Books

MATERIALS:

Brown (or white) paper grocery bags (or any unused paper)

Scissors

White glue or glue sticks

Embroidery thread (or similar thread or thin yarn) and needle

Awl

Typing paper

Decorative edge scissors (optional)

Decorations: photos, lace, buttons, pebbles, paper, pictures, fabric appliques, wallpaper scraps, etc.

 

VARIATION:

Use rubber stamps and ink pads to decorate the paper bags or potatoes cut into various shapes.

OPTIONAL EMBELLISHMENT:

Glitter dust – apply while ink is still wet

 

PROJECT:

  1. Cut the bottom off the paper bag. Cut up the side of the bag to make one flat piece. Decide how big you want your book. You can cut this piece in half or in four quarters. Fold the pieces so the writing is on the inside. Use as many bags as you need to make the number of pages you want. You many substitute typing paper or similar for the inside pages.
  2. Fold the pages in half. Stack the pages, one inside the other. Make holes along the fold with an awl for your needle to go through.
  3. If you are using embroidery thread, use three or four strands. Make a knot at one end of your thread. Sew along the fold and make a knot at the other end when you are finished.
  4. Decorate the front and back covers.

The sample above was decorated with rubber stamps, sponges, rubber stamp ink, fabric applique, markers, and decorative edge scissors.

Share Button
May20

RECYCLED CRAFT PROJECT: Nature’s Leaves Note Cards

Posted on by
RECYCLED CRAFT PROJECT: Nature’s Leaves Note Cards

 

The craft NATURE PRINTS was adapted from the project “From the Yard/Nature Prints” found in All-Around-the-House Art and Craft Book by Patricia Z. Wirtenberg and published by Houghton Mifflin Company in1968

Materials:

Leaves, bark, twigs

Printer’s inks or poster or acrylic paints in various colors (cheaper to use)

Drawing pencils (optional)

Rice or bond paper in white or various light colors (works best with poster/acrylic paints)

Brown wrapping paper or construction paper for use with printer’s inks

Brayer (or roller)

Piece of glass

Newspaper

Solvent for cleaning brayer and glass if using printer’s inks unless using water-soluble printer’s inks

  1. Collect fresh leaves from the trees or bushes in your neighborhood or yard. You will need some to experiment with and some for the last print. Other objects such as tree bark (if it’s easy to peel off) and even some twigs will work along with the leaves, too.
  2. Cover your work surface with newspaper. Lay down the glass and brayer on the work surface. Select the paints or inks that you will use. Acrylic or poster paints are less expensive than oil-based printer’s inks and easier to clean up after use.
  3. You can squeeze one color for each leaf or squeeze two or three colors side-by-side on the glass. The leaves in the samples shown used one or two or three colors at one time.
  4. Roll the paint or inks on the glass until the pigment covers the brayer. If you are using more than one color, let the colors run into each other. Roll the brayer over the leaf several times and turning the leaf over, lay it on a piece of paper like rice paper or bond paper. Use your hand to press the leaf so that it prints on the paper. Paper that is not too thick or too thin is the best to use if using acrylic or poster paints. Printer’s inks can use a slightly heavier paper like construction or brown wrapping paper.
  5. Remove the leaf and see how it printed on the paper. Experiment until you have a print that you like. Experiment with other materials from nature combined with the leaves.
  6. To create a mixed media design, color the whites of the leaves or the background paper or outline the printed leaves with colored pencils. See the two samples below.
  7. Frame the print or using old note card stationery, make note cards or poster cards of the printed leaves. They make a thoughtful gift for people who still write notes!
Share Button
May13

RECYCLED CRAFT PROJECT: TWIG FRAME

Posted on by
RECYCLED CRAFT PROJECT: TWIG FRAME

 

MATERIALS:

Twigs

cardboard or poster board

white glue

colored raffia (twine or string can be substituted)

scissors

pencil

ruler

photo

glue stick

 

PROJECT:

  1. Measure the photo. Measure and cut the board to the size of the photo.
  2. Collect twigs the size of the photo maybe a little longer. You will need three or four twigs for each side of the frame.
  3. Trim the twigs if needed with the scissors. Or get an adult to help you.
  4. Bundle three or four twigs and wrap the raffia around each end. Do this for all four sides of the frame.
  5. Glue the photo to the cardboard using a glue stick.
  6. Apply white glue to the bundled sticks and glue along one side of the photo. Glue the bundled twigs to the other sides. Allow to dry.
  7. Make a loop with any remaining raffia and glue it to the back of the cardboard. When that is dry, hang the photo.
Share Button
May5

CELEBRATE THE SEASONS! Spring is Here! Mobile

Posted on by
CELEBRATE THE SEASONS! Spring is Here! Mobile
SPRING MOBILE

SPRING MOBILE

Ages: 5 – 12 years

Time: ½ hour – 1 hour

MATERIALS:

Construction paper or craft foam in 4 pastel colors

Eraser/ Pencil

One dowel rods cut to 12”

Tacky glue or glue stick

Patterns from the Banners project

Hole puncher

Ball of jute or string or wire

Scissors

 

  1. Ask an adult to cut the dowel rods so that you have two. Cross them in the middle and tie them tightly with a piece of string or jute or wire. Lay aside.
  2. Select the paper or craft foam or use a combination of papers and craft foam. Trace and cut shapes from the patterns used for the Spring Is Here! Banner. Vary the sizes of the flowers. Add a yellow circle for the center of the daisy.
  3. Poke a hole near the top of the paper or craft foam shapes with a pencil or use a hole puncher. Then, lace a piece of string or jute or wire 6” to 8” in length through the hole at the top of each shape. Poke a hole at the bottom of the flowers and have some of them cascade downward. Tie the shapes to the dowel rods. To balance the mobile, place two or more shapes on each dowel rod and be sure that some of the shapes hang lower (or higher) than some of the others. This is called balancing or making the mobile level. Ask an adult for help if you need it.
  4. Tie a piece of string in the middle of the two dowel rods for hanging. Does your sculpture move? What makes it move? How is this design different from the banner design? What are the differences? What are the similarities?
Share Button
Apr27

RECYCLED CRAFT: PAPER PENCIL TOPPERS

Posted on by
RECYCLED CRAFT: PAPER PENCIL TOPPERS
PAPER PENCIL TOPPERS

PAPER PENCIL TOPPERS

MATERIALS:

Pencils (colored pencils, No.2 pencils, etc.)

Various scraps of paper (left over pieces of construction paper, typing paper, gift wrap paper, etc.)

Scissors

Templates

 

PROJECT:

  1. Decide the shapes of the pencil toppers: hearts, leaves, circles, squares, etc. Select the color paper to be used for each shape: green for leaves, red or pink for hearts, etc. Patterned papers are especially eye-catching for pencil toppers.
  2. Trace the shape on to the paper. Cut.
  3. Cut two small slits in the middle of the paper shape. Do not cut up to the edges. You want a slit wide enough to pass the pencil through.
  4. Slip the pencil through the slit and you have a pencil topper for your favorite writing tool!
Share Button
Apr21

RECYCLED CRAFT PROJECT: PAPER BAG BOUQUETS

Posted on by
RECYCLED CRAFT PROJECT: PAPER BAG BOUQUETS
PAPER BAG BOUQUET

PAPER BAG BOUQUET

 

MATERIALS:

Dried or silk flowers

Small brown paper bags

Sand, beans, rice, or bird seed for the base

Scissors or clippers

Raffia, twine, yarn, ribbon or string

Washi tape

Rubber stamps (optional)

Ink pads (optional)

Crimping scissors

 

PROJECT:

  1. Cut your bag to the size you desire.* Fill it with sand, beans, rice, or bird seed. This will hold the flower stems and keep your bag from falling over.
  2. Trim the top of the bag with the crimping scissors to give it a more decorative look.
  3. Use washi tape to decorate the bag. Or use rubber stamp designs in different colors.
  4. Cut the stems of the flowers short enough so they don’t fall over when you stick them in the bag.
  5. Tie string, ribbon or raffia around the neck of the bag.

*Any size bag will do as long as the flower stems show above the top of the bag.

VARIATION:

Use rubber stamps and ink pad to decorate the bags. Before the ink dries, sprinkle the designs with glitter dust. Shake the excess off. Allow to dry before completing project.

Share Button
Apr14

RECYCLED CRAFT PROJECT: PAPER BEADS

Posted on by
RECYCLED CRAFT PROJECT: PAPER BEADS
PAPER BEADS

PAPER BEADS

MATERIALS:

Brightly colored paper from magazines, scraps of gift wrap, catalogs, etc. or craps of thin paper stock.

White glue or glue stick

Scissors

Pieces of Yarn, string, fishing line, plastic-coated wire,or pipe cleaner etc.

Additional embellishments: tiny beads, glitter, small stickers (optional)

 

PROJECT:

  1. Cut long skinny triangles of paper, approximately 1” wide and 4” long.
  2. For each bead, smear glue on half of one triangle toward the tip.
  3. As you roll each triangle up, leave a hole through the middle for your string to go through.
  4. When the glue has dried, string the beads into necklaces, bracelets and even garlands.

VARIATION:

Measure and cut long strips of paper 1″ wide and 4″ long instead of cutting long skinny triangles of paper. Roll up or not too tightly around a pencil and secure with a spot of glue at the tip.

TIP:

Pipe cleaners can be bent to the shapes you desire: circles, ovals, etc. and the pipe cleaner will hold that shape.

 

Share Button