Category Archives: Art Tutorials

Summer Camp: Art Poster Collage

Summer Camp: Art Poster Collage

 

The best way to understand art is to make art. One easy introduction is to make a poster of photographs of works of art.

Take a trip to the museum with a parent and look at the works of art: paintings, sculptures, prints and drawings. There are many more forms of art, too, as you will see when you stroll through the galleries. These forms of art include the decorative arts such as pottery, jewelry or ceramics. Walk through the gift shop and collect postcards with works of art printed on them. Go to a thrift store or a flea market and buy old books or magazines about art or with works of art in them. Cut out the ones that are beautiful, interesting or meaningful.

Art Poster Collage

Art Poster Collage

MATERIALS:

Poster board, any size

Pictures of works of art from magazines, catalogs, old books, etc.

Rubber cement or glue stick

Scissors

  1. Cut out photographs of art works from magazines, newspapers, catalogs, or use postcards from the museum art shop. You can use copies of your art work, too.
  2. Your poster can have a theme like Greek Art (like the sample above) or Modern Sculpture or no particular theme. Glue the pictures to a piece of poster board forming a design.
  3. Study the pictures. Do you know which one is painting or sculpture or drawing or print? What do you like about them?
  4. Tape the poster inside your locker or on the door of your room. Or cut it to 8” x 2 ¼” and use the pieces as bookmarks.

* Art Work by Bridget Riley, Marion Constantinides, Kitagawa Utamaro, and Michel Touliere.

 

 

Share Button

Summer Camp: Paper Bag Animals/Paper Bag Pets

Summer Camp: Paper Bag Animals/Paper Bag Pets

 

Paper Bag People and Animals

Paper Bag People and Animals

Materials:

Lunch size paper bags, brown or white

Newspaper (or similar material)

String

Tape

Scraps of construction paper

Paste or glue

Ribbon and/or yarn

Sequins, buttons, seeds (for eyes, nose mouth)

Crayon and/or markers and/or colored pencils

Clip art

Scissors

Pipe cleaners (for whiskers)

Wiggle eyes

Rubber Band

Ruler

 

Project:

  1. Choose the pet or animal you will make.
  2. Stuff 1/3 of the bag tightly with crumbled or strips of newspaper (or similar material) to form the head (about two or three sheets).
  3. Gather the bag at the base of the head. Tie it securely with string or yarn.
  4. Stuff the rest of the bag with more newspaper and tape the bottom of the bag closed.
  5. Cut eyes, nose, mouth, and paws from construction paper or use sequins, buttons or seeds. Use pipe cleaners for the whiskers.
  6. Tie a ribbon or piece of yarn around the neck.
  7. Add buttons or other decorations to dress up you paper bag pet or person.

Alternative Projects:

  1. Make a paper bag person. Use yarn for hair and wiggle eyes. Follow the directions above.
  2. Stuff only the top 1/3 of the bag. Insert a long stick (like a ruler) into the head and secure with string, yarn or a rubber band. Use as a puppet and put on a play for your friends! Read the books below for more ideas:

Gauch, Patricia Lee. Poppy’s Puppet

Marsh, Valerie. Puppet Tales

 

 

 

Share Button

Summer Camp: A Tale of Three Rubbings

Summer Camp: A Tale of Three Rubbings

Materials:

Thin paper like rice paper or bond paper

Any kind of crayons including Wax crayons

Graphite

Textured surfaces: chain link fences, tombstones, bricks, sidewalks, gratings, certain fabrics

 

  1. Find an interesting raised surface to rub. For the first rubbing, select a surface and rub with either the graphite or one of the wax crayons.
  2. For the second rubbing, rub with a different wax crayon on another surface or on the same surface. The shift the paper up or down or sideways, rubbing the surface with another color or the graphite.
  3. For the third rubbing, select two or three colors and two or three surfaces to rub. Use only one sheet of paper for this. Select a color and rub the first surface with it. Rub the second surface with a second crayon. Rub the third surface with a third color or the graphite.
  4. Do you notice a pattern created with the different colors and surfaces? Insert your best rubbing in a poster frame and hang on the wall of your bedroom.
  5. Alternative Project: Rubbings also make great greeting or note cards. Cut a blank piece of paper in half. Cut the rubbing and paste it to the front of the folded paper.  Cut the rubbing smaller still and you can make gift tags the same way as the greeting card.

 

For more ideas on rubbings:

All-Around-the-House Art and Craft Book by Patricia Z. Wirtenberg

Arts and Crafts Activities Desk Book by Joyce Novis Laskin.

Share Button

Summer Camp: One Way to Make an Abstract Design

Summer Camp: One Way to Make an Abstract Design

 

Abstract Design

Abstract Design

MATERIALS:

Markers

Pencils

Crayons

Construction or bond paper

PROJECT:

  1. Find interesting objects in your home and trace them.
  2. Arrange them on construction or bond paper creating an abstract design.
  3. Trace the objects with markers or pencils or crayons. Trace one object at a time, adding objects as you go or lay them all down and trace them.
  4. Remove the objects from the paper. Choose three colors or two colors plus black. Now add patterns to the traced objects: dots, stripes, zigzags, checks or color some of the areas in the design.
  5. Mat the abstract design and display it or use it as a cover for a favorite book.

 

VARIATION:

Trace one object, turning the paper as you trace. Or overlap the object by placing it vertically, horizontally, upside down, etc.

 

Share Button

Summer Camp: Textured Prints

Summer Camp: Textured Prints
Textured Print

Textured Print

  Materials: Printer’s ink, black and two colors Glass surface Brayer Lightweight paper (rice or bond) Cleaner Rags

  1. Squeeze a line of black ink on the flat piece of glass. Roll the brayer over it and back and forth on the glass. Cover the brayer with ink.
  2. Find a very rough surface i.e., woven fabric, a collage of leaves, brick, stone, etc. Place the paper over this surface. Hold it firmly with one hand as you roll the inked brayer back and forth over it.
  3. Ink the brayer again and try another textured surface on a clean sheet of paper.
  4. Clean the glass and brayer thoroughly and wait to dry.
  5. Squeeze ink in the second color on to the glass and roll the brayer over it. Coat the entire brayer with the ink.
  6. Roll that color over a clean sheet of paper on another surface or roll the new color over the first sheet inked in black. Try different combinations of the two colors and black and different surfaces.
  7. Frame the finished textured prints or use them to make notecards.

ALTERNATIVE PROJECT:

Two textured collages,the one superimposed over the second, resulted in the textured print pictured above. The print was first printed in black ink rolled over a collage made of strings arranged in a pattern and glued to a board.  Geometric patterns made from poster board comprised a second collage. After the black ink dried, the print was placed on top of this second collage. Brown ink was rolled over the geometric shapes creating the design.

 

Share Button

Summer Camp: Windsock

Summer Camp: Windsock
Windsocks

Windsocks

 

Materials:

One sheet craft foam any color

One bandana any color or design or scrap of fabric (Ribbon is a good substitute)

Ink pen or fabric marker

Additional craft foam in various colors or craft papers in assorted colors

Patterns

Peel ‘n Stick Adhesive tape

Glue

Scissors

Hole punch

  1. Trace and cut patterns provided (below) on to the large craft foam.
  2. Adhere the adhesive tape to the back of the patterns, peel the back off and arrange them on to one side of the craft foam sheets (i.e., use green foam for the leaves, yellow foam for the daisies, etc) or use glue.
  3. Run a line of glue or the adhesive tape down the length of one short edge of the craft foam. Fold down the opposite edge of the craft foam and press to form an oblong windsock.
  4. Cut 1” slits along one edge of the bandanna or fabric and tear to form long strips.
  5. Punch three evenly spaced holes along the edge of the windsock. Insert a strip of fabric or bandanna into each hole. Make a knot to hold the strip in place. Gather the opposite ends of the fabric trips and tie them together into one knot.
  6. Punch evenly spaced holes along the bottom edge of the windsock for the remaining strips of fabric. Or cut small slits and poke the fabric through with the scissors. Place each fabric strip into each hole and knot each to secure in place.

Airports use windsocks to show wind direction and relative wind speed but they are also used for decorative purposes. Windsocks made of paper and silk originated in China and Japan. The ancient Romans used windsocks as military banners.

For more information go to www.ehow.com

 

 

 

Share Button

Summer Camp: Sgrafitto

Summer Camp: Sgrafitto
Sgrafitto

Sgrafitto

Sgrafitto is an etching technique that uses a pointed tool to scratch through a covered surface to show the art work beneath it.

Materials:

Wax crayons (Do not use black)

India ink or back poster paint

Pointed tool for etching such as a knitting needle or a toothpick

Cardboard or mat board

Brush

  1. Draw and color various abstract shapes on the cardboard or mat board. Make sure to use a heavy hand and leave a thick layer of wax crayon.
  2. Paint the cardboard or mat board with India ink or black poster paint. Allow the surface to dry completely. If the wax crayons show through, you need a second coat of paint or ink. Allow this coat to dry.
  3. Select the pointed tool you will use. You can experiment with different tools on a scrap of cardboard and then decide which one is best for your work of art.
  4. Have an image or design in mind or draw one on sketch paper first. Etch the design directly on the painted cardboard or mat board using various strokes: long, short, or circular going in various directions: horizontal, vertical or diagonal. Etch deeply enough to penetrate the first layer of ink or poster paint.
  5. Frame the sgrafitto and don’t forget to etch your name in the lower right-hand corner.

Inspired by: All-Around-the-House Art and Craft Book by Patricia Z, Wirtenberg

Art Work by Jeffrey J. Bennett

 

Share Button

Summer Camp: Sponge Painting

Summer Camp: Sponge Painting
Sponge Painting: The Sun

Sponge Painting: The Sun

 

Materials:

Household sponges in various shapes and sizes (Household sponges found in grocery stores can create interesting patterns and designs.)

Craft paints in various colors

Water jar

Paint palette or paper palette

Printing paper like bond or rice paper or sheets of canvas

Markers or colored pencils.
Project:

  1. Draw a design or picture on a piece of paper and use it as reference for the sponge painting. Or draw directly on the surface that you are going to paint, i.e., a sheet of canvas.
  2. Cut small pieces of the sponge from the larger sponge. To create an abstract design, snip tinier pieces from the divided pieces of the larger sponge.
  3. Squeeze the paints on the palette.
  4. Dampen the sponges and squeeze out the excess water.
  5. Dab the sponge in the paint and dab it on a piece of scrap paper to test the design and the amount of paint needed. A lot of paint on a sponge will create large blobs of color on the paper or canvas.
  6. With the design as reference, dab the paint on to the paper. Do not drag the sponge because that will smear the paint (unless smearing is the effect you want to create).
  7. Remember to wash and rinse the sponge to use again or use a separate sponge for each color.
  8. Continue until you have completed the painting. Add details with a marker or colored pencil when the paint is dry.

NOTE:  In the example above,  the central design was painted first, then the background.

ADDITIONAL PROJECT:

Create a sponge painting on wood or stone.

 

Inspired by Arts and Crafts Activities Desk Book by Joyce Novis Laskin

Share Button

Intro to Summer Camp: Paper Garland Sign

Intro to Summer Camp: Paper Garland Sign

Materials:

Paper in various colors

Scissors

Pencil/eraser

Ruler or yard stick

Markers

Glue stick

Hole puncher

Pipe cleaners, string, paper twists or similar material

Number stencils or templates (optional)

One chain link fence

  1. Make a sign for your clubhouse or to celebrate the beginning of summer and the end of school. Make a loop for every letter of your sign and for the space between the words. Make a loop at the beginning of your sign which will be blank and a loop for the end of your sign which will also be blank. For example, a sign that says “School is out!” will have 11 loops for the words, one for the exclamation mark, two for the spaces between words and an extra loop at each end. That would be a total of sixteen loops.
  2. Use four or five different colored papers. Measure and cut the colored papers into six or more ½” x 8” strips.
  3. Glue one strip of paper measuring ½” x 8” overlapping the ends. Then glue a strip of paper measuring ½” x 8” through the first loop. Alternate the colors of the paper strips until you have the required number of paper loops forming a garland. Use the photograph for reference.
  4. Next, cut paper rectangles in various colors about 1 1/2” by 3.” Make enough to spell out your message.
  5. Trace a letter on each paper rectangle by using a template, stencil or free hand. Trace any exclamation, question mark or symbol, too.
  6. Punch a hole at the top of each paper rectangle. Punch a hole in the loops. Do not punch holes in the first and last loops and the loops that represent spaces between words.
  7. Cut string or pipe cleaners or similar material and loop it through the holes.
  8. Or use your imagination and glue seeds, glitter, sequins and other decorative objects!
  9. Tie a string through the first and last loops and tie them on to the fence. Don’t forget to add extra loops when you change the message!
Share Button

Coloring Pages from the Pittsburgh Folk Festival

Coloring Pages from the Pittsburgh Folk Festival
Dolls

Dolls

Decorated Eggs

Decorated Eggs

Share Button